Skip to content

Brief introduction of silicon carbide products

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

A brief introduction to silicon carbide products

Silicon Carbid also known by moissanite, emery or coke, is an organic substance that has the chemical formula SiC. You melt it using a high temperature resistance furnace. There is also silicon carbide in nature. It’s a rare and valuable mineral known as moissanite. It is one of the high-tech non-oxide refractory materials, along with C, N and B. This material can also be called gold steel or refractory. China’s silicon carbide industry has two main types. They are black and green.

The two main types of silicon carbide are green and black, which both belong to the A-SiC. It contains 95% SiC and is tougher than green silicon carbide. It’s used mainly for the processing of low-tensile material, including glass, ceramics, stone and nonferrous metals. The SiC content of green silicon carbide is more than 97% and it has excellent self-sharpening capabilities. It’s used to process cemented caride, titanium alloy, and optical glasses, and also for honing of cylinder liners, fine grinding high speed steel tools, and as a tool for polishing high-speed steel. There is also cubic silicon carbide. It is a yellow-green, special-processed crystal. It is ideal for superfinishing bearings. Surface roughness can range from Ra320.16 to Ra0.04 0.02microns.

Because of its stability chemical properties, high thermal conductivity (low thermal expansion coefficient), and wear resistance silicon carbide can be used in many other ways than being an abrasive. A silicon carbide powder, for example, is used to coat a specific process impeller or the cylinder of an electric water turbine. An inner wall will improve the abrasion resistance of the steel and can extend its life expectancy by up to 2x. The high-grade, lightweight, strong, and energy-saving refractory that it produces is heat-resistant, light, compact, and small in size. A low-grade silicon carbide (with about 85% SiC), is an excellent metal deoxidizer. This can increase steelmaking’s speed, control the chemical composition of steel and enhance steel quality. Additionally, silicon carbide is used widely to create silicon carbide rods and electric heating elements.

It has an extremely high hardness. The Mohs Hardness of 9.5, which is second only to the hardest diamond (10), makes it a silicon carbide. This semiconductor has good thermal conductivity and is resistant to oxidation at elevated temperatures.

At least 70 different crystalline forms are available in silicon carbide. A-Silicon carbonide is the most widespread type of allomorph. It forms at higher temperatures than 2000°C, and it has hexagonal crystal structures (like wurtzite). The bSilicon Carbide cubic crystal structure is similar to that found in diamond and formed at temperatures below 2000°C. You can view the entire network on this page. The heterogeneous catalyst supports are not as attractive, however they can still be applied. This is because it has a larger unit surface than the a. M-silicon carbide (a stable form of silicon carbide) is more popular and produces a better sound from colliding. However, neither of these types has been applied commercially to date.

Its high specific gravity of 3.2g/cm3 and high sublimation temp (approximately 2270 degC) makes silicon carbide a great raw material for high-temperature furnaces or bearings. It is extremely resistant to heat and will not melt at any pressure. Many people use it as a replacement for silicon due to its thermal conductivity, high break-up electric field strength, and high maximum current density. You can also use it to heat metals because of its strong coupling ability with microwave radiation.

Silicon carbide itself is inert. Industrially produced browns and blacks are caused by impurities that contain iron. It is the protective layer of silica that gives the crystal its rainbow-like appearance. To

The pure silicon carbide crystal is colorless and transparent. Pure silicon carbide has a transparent, colorless crystal. There are two types of silicon carbide crystal structures: hexagonal (or rhombohedral) a-SiC or cubic b-SiC. This is also known as cubic silicon carbide. A-SiC has many variations due to the unique stacking sequence of silicon atoms and carbon in its crystal structure. There are more than 70 types. At 2100 degrees Celsius, bSiC can be transformed into a SiC. For silicon carbide industrial production, high-quality quartz is used along with petroleum coke. The product can then be refined in resistance furnaces. To make different particle sizes, the refined silicon carbide block is crushed.

Because of its low natural value, silicon carbide can be made artificially. You can mix coke and quartz sand. Next, make use of the petroleum coke and silica. Finally, add wood chips and salt to your mixture. Heat it up to 2000 degrees C. and you will get silicon carbide.

Due to its exceptional hardness, Silicon carbide has emerged as an indispensable abrasive. But its applications range far exceeds that of other abrasives. Because of its excellent resistance to high temperatures and thermal conductivity, it is a first choice kiln furniture material for tunnel or shuttle kilns. The essential element of electric heating is made from SiC conductivity because it has high electrical conductivity. SiC products must be first prepared using SiC melting blocks. Be aware that it has a different composition to natural garnet (also called emery). SiC smelting brick is often used in industrial production. It usually includes quartz, petroleum coke and other materials. used as raw materials and auxiliary recovery materials. After the grinding, other processing are completed to create a mixture with a proper ratio. A suitable particle size is required to adjust charge’s gaspermeability. For green silicon carbide preparation, make sure to add sufficient salt. Special silicon carbide electrical furnace is used for heating the SiC melting block to high temperature. It consists of the furnace base, the end walls with electrodes on their inner surfaces, the removable sidewall and the furnace body. The electric heating element at the centre of the electric furnace is called the furnace core. Graphite powder, petroleum coke, or graphite, are installed according to the shape of the charge. Both ends are linked with electrodes. The common firing method for this electric furnace is known as buried-powder firing. When the furnace is turned on, it begins heating. At 2500 degC the furnace core temperature, but it could heat to as high as 2600-2700degC. SiC is synthesized once the charge has reached 1450degC. But SiC is mostly formed at >=1800degC. SiC will eventually decompose if the temperature is >=2600. However, the si that remains will be SiC with C.

A set of transformers is included in every electric furnace. To maintain constant power, only one electric furnace is used during manufacturing to set the voltage to match the characteristics of the electrical loads. For the electric furnace to heat, it must be heated for approximately 24 hours. If the power goes out, SiC will not be generated. After cooling the siC can be removed and the charge slowly taken out. You can divide silicon carbide products into several categories. These are categorized according to the use environments. Silicon carbide products are generally more used in machinery. When used for mechanical seals it is called a Silicon Carbide Seal Ring. It can be classified into three types: static ring (moving ring), flat ring, and flat ring. You can order silicon carbide parts in various forms, like silicon carbide special shapes, silicon caride plates and silicon carbide rings.

Silicon carbide ceramics are one of many silicon carbide products. They have the properties of high hardness as well high resistance to corrosion and high strength. This makes them widely popular.

Silicon carbide ceramic can be used as a seal ring material. This is because it has high chemical resistance and hardness. The friction coefficient of silicon carbide ceramic when paired with graphite is lower than those of cemented carbid and alumina ceramics. It’s therefore suitable for use in high PV conditions, particularly where strong acids or alkalis are being transported. Our company produces SIC-1 silica carbide atmospheric sintered products that have high levels of density and hardness. We also produce large quantities, which allows us to create products with complicated shapes. They can be used for high performance seals and are resistant to strong acids or alkalis. The SIC-3 Silicon Carbide Ceramics are made from graphite-containing SiCride Materials. Because the matrix of silicon carbide contains fine graphite dispersed in small amounts, it has a low friction coefficient. The silicon carbide matrix has excellent self-lubricating qualities, making it ideal for dry-friction seals. The seal’s durability and reliability can be improved by using it in the medium.

Unreacted material is used to heat preserve the furnace after high-temperature, calcination. The furnace core graphite is the second-class SiC layer. This layer contains the C and SiO main components. Unreacted material and part of oxycarbide are often collected in spent materials. The other half of the oxide layer material is then collected along with the second-grade product and part the bonded material. The charge and certain bonds that have tight binding, large lumps or many impurities should be thrown out. Classification of the first-grade product includes coarsely crushing, finely crushing, chemical treatment, drying and sieving, magnetic separation into SiC particles of different sizes, and then storage. For silicon carbide powder it needs to go through water selection. However, for silicon carbide products they must be formed and sintered.

Luoyang Tech Co. Ltd. is an Silicon caride professional manufacturer who has over 12 years’ experience in chemical product design and development. We can help you find high-quality Titanium dioxide.

Inquiry us