Skip to content

High Purity Titanium Carbide Nannoparticles Nano TiC Powder CAS 12070-08-5, 99% | Lemondedudroit

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email:

The titanium carbide nanoparticles can be dissolved in water, and they have high chemical stability. It dissolves in aqua regia. Nitric acid and hydrofluoric Acid. Also, it is soluble with alkaline oxygen solution.
Purity: 99%

Particle Size 50 nm


Titanium Carbide Nanoparticles Nano TiC Powder


Nano titanium carbide

This material is very wear-resistant. The material has been prepared using a specific process.

Nano TiC

This is a widely-used material in cemented carbide, wear-resistant superhard materials and other applications.

Titanium carbide

The melting point for cemented caride is approximately 3200. It is an essential component of cemented carbonide.

nano titanium carbide

This can decrease the sintering temperatures of titanium carbide-ceramic ceramic by about 200 degrees. It also can improve ceramic’s grain quality and sintering performance.

Tiny titanium carbide

Can be used in ceramic matrix materials as a reinforcing layer to improve their mechanical and electrical characteristics.

Globally trusted

Titanium Carbide Nanoparticles Nano TiC Powder


. You can send us an inquiry regarding the most current information.

Prices starting at

Titanium Carbide


Titanium Carbide nanoparticles Nano TiC powder: Product performance

CAS12070-8-5 Titanium carbide Nanoparticles ( CAS12070-8-5 ) has high purity. They have small particle sizes, uniform distributions, high specific surface activity and high temperature resistance.

Technical Parameters of Titanium Carbide Nanoparticles NanoTiC Pulse:

Product name MF Purity Size of the particle Crystal Form SSA The color of the sky
Titanium carbide nanoparticles TiC 99% 50nm Cubic 23m2/g Black

It is simple.

Titanium Carbide Nanoparticles Nano TiC Powder


As the primary raw materials, use titanium dioxide (TiO2) or graphite pulverized as titanium dioxide.


Titanium Carbide Nanoparticles Nano TiC Powder


The raw material used in powder metallurgy to produce ceramic and cemented carbonide parts like wire drawing die and cement carbide die is nano titanium carbide. These characteristics are present in the nano-titanium carbide-based cemented caride: Good hardness up to greater than HRA90, good wear resistance, low wear rate, excellent high-temperature and oxidation resistance, as well as high thermal conductivity. The applications for nanometer titanium carbide powder are numerous. It is used to make wear-resistant materials, tools for cutting, and smelting metalcrucible. This nano-sized titanium carbonide powder is also used in optical applications. At the moment, nano-titanium carbide can be found in many countries, including Russia, Japan and the United States. Use of the abrasive or grinding wheel as well as grinding paste, along with other products made from nano titanium carbide, can significantly improve grinding efficiency and accuracy.

Make sure to use resistant tools

Because of their elastic nature, titanium carbide particles are ideal for producing all types of wear resistant tools including cutting and other tools with abrasive surface.

Abrasive bearings:

A key role is played by titanium carbide in some of the abrasive-bearings.


It is a nano-powder that can produce special coatings.


The electrical conductivity of titanium carbide makes it an excellent additive for alloys and composites.


As nucleating agents, titanium carbide nanoparticles are possible.

Optics: Used in certain ceramics of titanium carbide for many optical applications.

Storage condition

Titanium Carbide Nanoparticles Nano TiC Powder:

At normal temperatures, seal at cool temperature.

Transporting Titanium Carbide Nanoparticles Nano TyC Powder

Many types of packing are available depending on the Titanium Carbide Nanoparticles NanoTiC powder quantity.

Titanium Carbide Nanoparticles Nano TiC Pulp packing: Vacuum packing, 100g 500g or 1kg/bag 25kg/barrel and as per your request.

Titanium Carbide Nanoparticles NanoTiC Powder Shipping: After payment receipt, shipping could be done by sea or air.

Technology Co. Ltd. (), is a trusted supplier and manufacturer of chemical material. We have more than 12 years experience providing high-quality chemicals, Nanomaterials, and boride powder.

High-quality products are what you want

nano TiC powder

Please feel free and contact us to send us an inquiry. (

Titanium Carbide Properties

Other Titles
titanium(IV) carbide, TiC powder


Compound Formula

Molecular Weight

Black Powder

Melting Point
3160 degC

Boiling Point
4820 degC

4.93 g/cm3

Solubility of H2O

Exact Mass

Titanium Carbide Safety & Health Information

Signal word

Hazard Statements

Hazard Codes

Risk Codes

Safety statements

Transport Information

Inquiry us