Skip to content

New Record! The Most Heat-resistant Materials Were Born – Tantalum Carbide and Hafnium Carbide Materials

What is Tantalum Carbide, Hafnium Carbide and what are they?
Tantalum citride is a brownish metal cubic powder. It belongs to the sodium chloride type cubic system. A cemented carbidide sintered grain growth inhibit, tantalum carbonide, has an effective effect on suppressing the growth of grain. It is insoluble when dissolved in water. It is very antioxidant and easily melts and is decomposed with potassium pyrosulfate. It exhibits superconducting characteristics due to its high conductivity.
Hafnium carbide usually is synthesized by cerium dioxide (HfO 2 and carbon under an inert- or reducing atmosphere. You can create a solid solution at the reaction temperature from 1900 to 2300 ° C with several compounds (such ZrC, TaC. ).
Tantalum Hafnium Carbide properties:
Researchers created new heat-resistant materials in tantalum and hac, which are capable of enduring temperatures exceeding 4,000 °C.
Imperial College London’s research team also established a new mark in the material field by finding that tantalum carbide has a melting point that is nearly 4000°C. They are capable of withstand extreme heat up to 4000 °C, so they could be used for insulation in hypersonic spacecrafts.
Tantalum carbide carbide is a refractory clay, so they are excellent at resisting heat. They are able to resist extreme environments and could therefore be useful in applications like thermal protection systems in high-speed spacecraft, fuel cladding of nuclear reactors under extremely-heat conditions. The melting temperatures of TaC/HfC ceramics is difficult to determine, and there are no laboratory technologies available that could test them.
They developed a new method of extreme heating, which utilizes lasers in order to check the heat resistance for TaC/HfC. This method allowed the researchers to measure the melting temperatures of the TaC and HfC element and mixture. Scientific Reports recently published the research.
They discovered that the combined melting point (Ta0.8H2O20C of two ceramics) was the same as the last study. It reached 3905 °C. However, they found the melting points themselves to be higher than the previously reported results. HfC’s melt point is 3958 °C while TaC’s melt point is 3768°C.
They believe the two new materials will be the basis for the next generation supersonic aircraft. Spacecraft in the future will likely be faster than ever.
Dr. Omar Cedillos Barraza performed the research during his Ph.D. program in Physics at Imperial College London. Assistant professor at University of Texas at El Paso.
Dr. Saidi Barazza pointed out that an aircraft flying at supersonic speeds exceeding Mach 5 will experience friction with the air, resulting in extremely high temperatures. HfC, TaC, and C have so far not been employed. It is being used in the design of hypersonic vessels. Our findings have shown that these materials can withstand heat more than was thought. Indeed, they are stronger than other heat-resistant compounds. This means that these materials are suitable for spacecraft. Spacecraft in the atmosphere can fly as normal planes but can then travel at very high speed in space. These materials are capable of making spacecraft withstand high temperatures generated by the shuttle’s atmosphere.
HfC, TaC, and the nose cover are two examples of possible uses. The external instrument at the end that rubs against the outside most during flight is an example of this.
Spacecrafts capable of more than 5 Mach have not been able to fly manned missions. Dr. Saidi Barazza indicated that this dream could be realized very soon.
Dr. Saidi Barazza also stated: “Our testing show that both these materials possess great potential in building future spacecraft. Both these materials can endure extreme temperatures. A Mach 5 flight will take us from London into Sydney in just 50 minutes. The world will benefit. The new continent is a source of new business opportunities.
Tantalum hafnium carbide uses:
Tantalum can be found in powder metallurgy as well as fine ceramics. It is also used in chemical vapor deposition to make hardwear resistant alloy tools. Tantalum carbide can also be used in watch ornaments because of its sintered bodies.
Hafnium-carbid can be used to make rocket nozzles. It is found in ceramics and other industries.
Lemondedudroit, Lemondedudroit advanced material Tech Co., Ltd., is a Tantalum carbide producer. It has over 12 year experience in chemical product development. Contact us to inquire about high-quality Tantalum carbide.

Inquiry us